Coval Plastic Coat is a durable protective coating for all kinds of plastic and vinyl. It restores color and protects from stains, UV, and oxidization; creating a hard, nonporous, molecularly bonded surface. Plastic Coat, like all Coval products, helps protect from graffiti. In normal circumstances this coating is good for about one year, after which it can be re-coated. (See instructions)
Note: This product is not suitable for smooth high density polyethylene or polypropylene.
Note: For improved performance in high wear areas, mix 1 part Coval Quick Seal & Enhance to 5 parts Coval Plastic Coat. This mix also allows for easy re-coating and touch-ups.
Test: As with all Coval products, it is recommended to test for compatibility in a small area before full application.
Surfaces must be clean, dry and free of waxes. Use Coval Step #1 Cleaner for Painted Surfaces and then rinse with water. Allow to dry thoroughly. Mask off all areas not to be covered, and provide adequate ventilation. Stir well, before and during application, to maintain suspension of nanoparticles. Plastic Coat is best applied with a HVLP (high-volume-low-pressure) spray system, with a 1.0-1.3 size tip and the pressure set at approximately 25 to 30 psi. Clean-up immediately with acetone.
Note:All equipment must be chemical and acetone resistant.
Caution: A professional spray mask should be used with this product, as well as eye protection, rubber gloves, and coveralls.
Wash with soap and water, or use Coval Step #3 Safe Clean.
|Uses||Seals, restores and protects all types of plastic and vinyl from stains, UV, and abrasion.Surface protection||(Does not work on smooth high density polyethylene or polypropylene.)|
|Suitable surfaces||Auto interiors, vinyl out door seating, awnings, etc.||(Does not work on smooth high density polyethylene or polypropylene.)|
|Applications||Spray (HVLP) or ultra-smooth high density roller||1.0-1.3 tip and 25 to 30 psi.|
|Voc"s||20 g/l VOCs|
|Coverage (this is a one coat product)||800-1200 sq. ft. per gallon|
|Clean-up||While soft: Acetone.||When hard: none|
|Dry time||Touch dry: 1½-4 hours Full Cure: 7 Days Note: It is important to protect surface from water or rain for at least 5 hours after application.|
|Other relevant Coval products||Coval Quick Seal & Enhance Coval Vinyl Floor Coat||Coval Step #1 Cleaner for Painted Surfaces|
|Ambient temp and humidity limits||45° F to 105° F working limit.||Safe Relative Humidity: 90% or less|
WARNING: Always use appropriate protection when using Coval products; including appropriate respirator,safety goggles, butyl-rubber gloves and coveralls; also, mask off or cover, all adjacent areas.