Coval Vinyl Floor Coat

Coval Vinyl Floor Coat is a high performance protective coating for all kinds of vinyl flooring products. It improves durability and molecularly bonds to the surface, creating a stain and corrosion resistant membrane. It reduces the need for waxing and cleaning, and prolongs usability.
Test: As with all Coval products, it is recommended to test for compatibility in a small area before full application.

Caution: A professional spray mask should be used with this product, as well as eye protection, rubber gloves, and coveralls.


New vinyl floors should have 3 or 4 coats of wax burnished into them before applying Coval Vinyl Floor Coat, this will reduce absorption.
Important: Floors should be clean and clear of stains or marks before application; if not removed they will become permanent.

Make sure to completely stir before and during use, to fully suspend nanoparticles. Coval Vinyl Floor Coat is best applied with a pump (deck) sprayer, which must be chemical and acetone resistant. Mask off all areas not to be coated. Apply a thin, even coat without puddling, Allow to dry. Clean up equipment immediately with acetone. If a second coat is for some reason required, wait 24 hrs, give a light sanding with 220 grit, and re-coat.

Coval Vinyl Floor Coat - Specifications

Uses Seals and protects all kinds of vinyl floor products, Linoleum, and Vinyl Composition Tile.Surface protection  
Suitable surfaces Vinyl floor products, Linoleum, and Vinyl Composition Tile.
Applications This is a one coat product. If a second coat is required, wait 24 hours sand lightly and re-coat.
Solvent based YES  
Water based NO  
Flammable YES  
Voc"s Under 100 VOCs
Coverage 500 - 800 sq ft/gal. Requires two coats
Clean-up While soft: Acetone. When hard: none
Dry time All Coval Molecular Coatings are dry to the touch in 2-3 hours. Full cure 7 days. Note: It is important to protect surface from water or rain for at least 5 hours after application
Application Method Pump (deck) sprayer, or ultra-smooth high density roller Equipment must be chemical and acetone resistant
Other relevant Coval products Coval Step #3 Safe Clean
Sheen Gloss
Porosity Non-breathable
Flash point
Ambient temp and humidity limits 45° F to 105° F working limit. Safe Relative Humidity: 90% or less

WARNING: Always use appropriate protection when using Coval products; including appropriate respirator,safety goggles, butyl-rubber gloves and coveralls; also, mask off or cover, all adjacent areas.

Subscribe now to receive industry information, relevant news and special updates.

We respect your privacy.